Compatible with High profile tiles, including Plain & Rosemary Tiles, manufactured by all major tile suppliers.

The Continuous Dry Verge should be cut to the required length, allowing for a plumb cut at the ridge, and approximately 150mm longer than the rafter. The horizontal flange is cut away, to allow fitting over the felt support tray at the eaves. The battens are placed against the lip of the water channel of the dry verge, which are then nailed into position directly through the horizontal fin of the Verge. The nails are fixed through both batten and verge, into the timber rafter. A close-up of the roof battens in place show their position against the lip of the drainage channel.